| PRODUCT FEATURE |
SUMMARY |
 |
|
Production Rate | Standard model: 3,000 gallons/day suitable for most homes. Two model options: 6,000 and 9,000 gallons/day.
|
|
|
System Efficiency | Recovery Rate: up to 90% (vs. previous generation RO as little as 20%) based on inlet conditions of 50psi (3.44 bar), 77ºF (25ºC), 6.5 to 7.5 pH; consistent high recovery system means significantly less water going to drain; actual recovery rate dependant on specific water dynamics
|
|
|
Membrane Rejection | 99.8% rejection rate with an adjustable control to pre-set desirable minerals into finished water
|
|
|
System Flow Sequences | Polywound Filter, Activated Carbon Filter, Ultra-Efficient Reverse Osmosis Membrane, Storage Tank, Polishing Filter, Variable Speed Pressure Regulator Pump, UV Treatment
|
|
|
Voltage | 230 volts, single phase, 60hz, 30 amps
|
|
|
Custom Micro Processor | Constant monitoring and control of overall system; software upgradeable; monitors pressure and total dissolved solids (TDS); controls solenoids, booster pump motor and purge cycle; activates auto flush of membrane
|
|
|
Sediment Filter | 1 micron, pure polypropylene wound particulate filter to eliminate particles (undissolved solids); 4"x20" component; includes pressure gauge
|
|
|
Activated Carbon Filter | Extruded carbon block cartridge to eliminate all gases including chlorine, fluorine and hydrogen sulfide; protects RO membrane, improves taste and odor characteristics; 4"x20" component; includes pressure gauge
|
|
|
Reverse Osmosis Membrane | 4" x 40" heavy-duty spiral wound energy-saving polyamide TFC membrane; reduces microscopic impurities (including bacteria, protozoa cysts & viruses) as small as 0.001 micron; Pressure Vessel: fiberglass, corrosion-resistant capable of withstanding 250 PSI
|
|
RO Filtration Pump & Motor
(3,000 gallons/day model) | Motor: 1.0 HP, 230 volt, single phase, 9amp, 60hz, TEFC (Totally Enclosed Fan Cooled); Pump: multi (14)-stage, 150 PSI to deliver optimal pressure and flow to membrane
|
|
|
Storage Tank | 200 gallon low profile, polyethylene tank (standard); includes four float switches to ensure water supply and to protect overall system and function; alternative size tanks available depending on property needs
|
|
|
Household Pressure Pump | ¾ HP; variable speed pump to maintain constant pressure at every outlet throughout property; adjustable up to 70 PSI
|
|
|
Polishing Filter | Second activated carbon filter to ensure excellent tasting water and eliminate any odor
|
|
|
Ultra-Violet Treatment | UV sanitizing light, 39 watt, 12 gallons/minute, rated with a life of 9,000 hours to deactivate any possible remaining microbes; includes monitor with LED lamp and audio alarm
|
|
|
Mineral Enhancement | Following purification, water is enhanced with added minerals to 50 – 75 ppm for healthy benefits and great taste
|
|
|
Pre-Treatment | Typically none needed beyond the standard sediment and carbon filter. In extreme cases (i.e. excessive hardness or iron) additional treatment may be required.
|
|
|
TDS Monitor | Ongoing monitoring of re-circulating water; adjustable to control automatic purge level
|
|
|
Automatic Shutoff | Pressure sensor to monitor low pressure or loss of water flow; automatic shutoff to protect the system; fault light (LED)
|
|
|
Pressure Regulator | Gauge to ensure proper water pressure within RO processing system
|
|
|
Tubing & Fittings | Industrial-strength, high pressure tubing and fitting system
|
|
|
System Bypass | Manual bypass valve ensures household water supply in the event of neighborhood or home electrical power failure; optional battery back-up available
|
|
|
Dimensions | Standard model: 36" x 54" footprint, height: 60"; weight: 235 lbs. (approx.); includes low-profile tank with system assembly rack (lightweight aluminum) situated above tank. Incremental tank, if needed, will add to overall footprint
|
